|
|
Cat Code: TX-AV500
Discontinued
click
here
for similar product
|
|
EXPORT SALES ONLY ! - NOT
AVAILABLE in Australia
This 500 milliwatt Transmitter does
not comply with Australian
Communications Authority regulations therefore it is not available in
Australia, available to overseas buyers ONLY !
|
$99
HIGH
OUTPUT 500 milliwatt 4 Channel 2.4
GHz Video Transmitter Module with Line Level Audio input, fully self
contained only requires Antenna and Power supply to operate.
Output: 2.4 ~ 2.483 GHz, 500 (+/- 100)
milliwatts EIRP with 3 dBi Whip antenna, 50 ohms impedance, SMA Female
Socket.
Video Input: Composite
Video standard 1 V p-p, 75 ohms, compatible with CCIR, PAL, EIA, NTSC,
SECAM TV Systems.
Audio Input: Maximum 2 V
p-p.
Power Requirements: 10 ~ 12
Volts DC well filtered and Regulated, ~ 250 mA.
Unit requires good
ventilation, operating temperature @ 20°C ambient is ~ 45°C.
Inputs: ~ 100 mm Wires.
Dimensions: ~ 26 x ~ 50 x ~
13 mm, ~ 40 grams.
Cat Code:
Cable-TXAV500 Plug-In Cable
Set $5
|
Manufacturer's Experience: 10 +
Years ISO 9001 Certified, made in Taiwan.
Module is completely
"Self-Contained" no interface PCB or any other components required.
Simply connect to Power Supply, Video or Audio source and Antenna.
Need Sound ? click here
Compatibility:
Transmissions may be received with:
RX-Mini Mini 2.4 GHz AV Receiver
Connection info:
here
USES
Wireless Video & Audio RF
Transmission link for covert spy and Cable-Free Wireless CCTV Video Surveillance
Cameras, Quad Screen Processors, Switchers, Monitors, Multiplexers, Video
Recorders, Digital PC Recording.
Portable Wireless Video
Transmitter for covert pinhole video camera surveillance in Shops - Showrooms -
Exhibitions - Work Places - Casinos - Theatres - Concerts - Nightclubs - Outdoor
Events - Cinemas - etc. Portable Home Video Surveillance to monitor Swimming
Pools - Caravans - Boats - etc.
Observation of Horses - Show
Animals - Livestock - etc during transportation in Floats - Trucks - etc.
Automobile Rear Vision and
general observation Video Systems for Caravans - Large Boats - Semi Trailers -
Road Trains - Aircraft - Buses - Modern or Historic choo.. choo..
Trains - etc.
Wireless AV link for VCRs,
Satellite TV, DVD, PCs, Pay TV, MDS, Cable TV, Lightweight Compact Video Cameras
for shooting video program material, Remote Control: Cars - Boats - Hovercraft -
etc.
RANGE
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones, Wireless LAN, etc),
Antenna Alignment, Electromagnetic & Radio Frequency interference in the
vicinity. This device will be affected by and will affect other devices
that operate on or near the same frequency causing minor to severe interference.
In ideal, clear, Line-of-Sight
conditions:
5 dBi Whip antennas on TX &
RX up to ~ 500 metres.
Correctly matched and aligned 18
dBi antennas on TX & RX up to ~ 2 500 metres.
Due to the nature of Radio
Signals results are unpredictable (in the same manner as Mobile / Cellular
Telephones) signals reflected from surrounding objects arriving at Receiver
antenna may Add-to or Subtract-from the direct signal from Transmitter.
Directional antennas may reduce affect of reflected signals.
ANTENNAS
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on Receiver and Transmitter.
For maximum signal transfer TX and RX antennas should be the same polarity, that
is both oriented Vertically or Horizontally.
 |
Cat Code: Ant-Stub
$5
0 dBi gain, ~ 50
ohms impedance.
Length: ~ 52 mm.
Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male
Connector.
|
 |
Cat
Code: Ant-Whip
$15
~ 3 dBi gain, ~ 50 ohms
impedance.
Length: ~ 145 mm straight ~124
mm folded. Diameter: ~ 9 & 10 mm. Weight: ~ 16 grams.
SMA male Connector.
|
 |
Cat
Code: Ant-W5dB
$20
~ 5 dBi gain, ~ 50 ohms
impedance.
Length: ~ 195 mm straight
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top.
Weight: ~ 30 grams.
SMA male Connector.
|
 |
Cat
Code: Ant-W9dB
$99
~ 9 dBi gain, ~ 50 ohms
impedance.
Length: ~ 610 mm ~ 825
mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm
main center section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730
grams with Mounting Tube & Clamps/Brackets.
Supplied with Base Mount Tube and
Clamps/Brackets for surface or Tubular Mast mounting. N
female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-W12dB
$129~ 12 dBi gain, ~ 50 ohms
impedance.
Length: ~ 1210 mm ~ 1425 mm
with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main
center section ~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams
with Mounting Tube & Clamps/Brackets.
Supplied with Base Mount Tube
and Clamps/Brackets for surface or Tubular Mast mounting. N
female Connector. <Adaptors
& Extension Cables>
|
 |
Cat Code: Ant-Y8
$69
Yagi ~ 8 dBi gain, ~ 50 ohms impedance.
~
500 mm RG-142 Coax cable. Dimensions (excluding Clamps) ~ 290 x
95 x 35 mm, ~ 530 grams.
Cat Code: Ant-Y12
$89
Discontinued
Yagi ~ 12 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x
95 x 35 mm, ~ 600 grams.
Cat Code: Ant-Y15
$99
Yagi ~ 15 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x
95 x 35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x
70 mm Aluminium mounting plate, Clamps, etc. Pictured in
Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y8C
$89
Compact Yagi 2.4
~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohms impedance. Beamwidth: E70,
H90.
Dimensions
(excluding Clamps) ~ 190 mm, ~ 75 mm diameter, ~ 500 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y10C
$99
COMPACT Yagi 2.4
~ 2.5 GHz, ~ 10 dBi gain, ~ 50 ohms impedance. Beamwidth: E44,
H56.
Dimensions
(excluding Clamps) ~ 280 mm, ~ 75 mm diameter, ~ 500 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector.
|
 |
Cat Code: Ant-Y12C
$109
Yagi 2.4 ~ 2.5
GHz, ~ 12 dBi gain, ~ 50 ohms impedance. Beamwidth: E35, H40.
Dimensions
(excluding Clamps) ~ 450 mm, ~ 75 mm diameter, ~ 650 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y16C
$119
Yagi 2.4 ~ 2.5
GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28, H28.
Dimensions
(excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y17.5C
$149
Yagi Antenna 2.4
~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23,
H24.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-F16
$129
COMPACT Flat 2.3
~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 27º
(H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm
(D), ~ 740 grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat
Code: Ant-F18
$149
COMPACT Flat 2.3 ~ 2.5 GHz, ~
18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H) ~ 75º
(V).
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions (excludes Socket
& Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.
Pictured in Vertical Polarity
orientation.
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: Ant-P10
$89
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 30º (H) ~ 60º (V).
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets)
~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA female
Connector. <Adaptors &
Extension Cables>
|
 |
Cat
Code: Ant-P18G
$149
Sectional Grid Parabolic, 2.4
~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance Dipole. Beamwidth ~
25º in vertical polarity mode, Front to Back ratio ~ 20 dB.
Fitted with ~ 750 mm RG-8/U Coax cable.
Reflector ~ 390 x ~ 545 mm.
Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting
hardware.
Carriage in an Air Satchel
$24, via Post $35.
Pictured in Vertical Polarity
orientation * Mast not included. Gold Irridite coated
version pictured, we now stock a more durable Galvanised version
only.
N male Connector.
<Adaptors & Extension Cables>
|
ADAPTORS
 |
Cat
Code: SMAm-Nf $10
SMA male to N female. Suitable for P18G antenna. |
 |
Cat
Code: SMAm-Nm $10
SMA male to N male. Suitable
for F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
 |
Cat
Code: SMAm-m $10
SMA male to SMA male. Suitable
for P10 antenna.
|
 |
Cat Code: Cable-178/30
$19
30 cm RG-178 Coax
cable with SMA male & female connectors.
|
 |
Cat Code: Cable-23/450
$59
~ 450 cm Coax Cable with
SMA male & female connectors. Attenuation ~ 0.75 dB/metre @ 2
GHz.
Cat Code: Cable-23/450N
$59 not pictured
~ 450 cm Coax
Cable with SMA & N male connectors.
Attenuation ~ 0.75 dB/metre @ 2 GHz. Suitable for
F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
|
|
Parabolic Yagi &
Flat are directional antennas. Whip antennas when used vertically are
for most practical purposes omni or non directional.
To maximise 'Range'
minimise the length of Coax Cable between Antenna and TX/RX.
|
|
Antenna Gain... what does
it mean ??? a simplified explanation
Received signal strength
from an antenna with 3 dBi gain will be double that from an antenna that
has 0 dBi gain, received signal strength from a 6 dBi will be double that
from a 3 dBi and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or transmitter
output. Range can be doubled by either increasing antenna gain by 6 dBi or
quadrupling the transmitter output.
The maximum allowed 2.4
GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in
Australia), increasing transmitter output is illegal and therefore not an
option.
Increasing the gain of
the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to
3 dBi is equivalent to raising the output power of a 10 mW transmitter to
~ 20 mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15
dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
* LIPD = Low
Interference Potential Devices. * EIRP = Equivalent Isotropically
Radiated Power. Source: Australian Communications Authority
Click below for information on Frequencies & Power Limits
http://www.aca.gov.au
|
** Information
plagiarised from this page may be found on 'copy-cat' Web Sites **
Use your Browser "Back
Button" to return to previous page
500 milliwatt Tiny Video
Transmitter VIDEO & AUDIO 2.4 GHz AV Sender Module, self contained 4 Channel
Wireless CCTV Spy Covert Video Transmitter ideal for Hidden Covert Spy Concealed
or Discreet Video Surveillance, Compact Portable CCTV Video Surveillance or for
In-Camera Installation. Range in ideal clear line-of-sight conditions up to 2.5
kilometres with High Gain Antennas.
